Technique
anti-vibration
Slabs, insulated foundations, floating slabs
FOUNDATION INSULATION
- Active and passive vibration isolation.
- Low natural frequency for low frequency vibration isolation.
- Obtained thanks to the specific shape of the profile.
- Natural frequency: 08-20 Hz depending on the load.
- Large arrow.
- Non-slip.
- Resistant to ageing.
- No maintenance.
PLAKISOL 45
- Slotted plate on both sides;
- Easy to cut without tools.
- 3 hardnesses.
- Multiple applications.
- Good grip on the ground.
- NBR elastomer resistant to oil, grease and UV ozone.
- Load capacity: 0.10 to 6 kg/m².
PLAKISOL EPA
- Plate with metal frame for heavy load and holding flange.
- Non-slip.
- Maximum load: 1,500 kg.
PLAKISOL IM
- Special profile plate to improve insulation efficiency.
- Shock absorption.
- PU elastomer, resistant to oil, grease, UV ozone and high damping power.
- Load capacity: 0.50 to 8 kg/m².
PLAKISOL GH
- Square support consisting of an upper steel plate with a counterbore for the positioning of a jack screw and an NBR elastomer.
PLAKISOL PL PA
VIDEO
- Complex.
- Wood + mineral wool + rubber springs.
- Format 1500×1000 - 1000×1000.
- Natural frequency > 8Hz.
- True vibration isolator and shock absorber.
- For 12 to 15 cm thick concrete slabs.
PLAKISOL PL VR
VIDEO
- Complex.
- Wood + mineral wool + steel springs.
- Format 1500×1000 - 1000×1000.
- Natural frequency > 3 Hz.
- Low frequency vibration isolation.
- Passive vibration insulation.
For 12 to 15 cm thick concrete slabs.
PLAKISOL PLHT
- PLHT structure support.
- Support for building or heavy structure loads.
- Creep limited to 5% of the plate thickness.
- Shock absorbing capacity.
- Unlimited life span.
PLAKISOL SG
- Anti-slip grooved plate.
- Load capacity 25 kg/cm².
- Active insulation.
- PU elastomer, resistant to oil, grease, UV ozone and high damping power.
PLAKISOL SG 90
- 20 mm thick smooth support in 90 Sh A elastomer reinforced with polyamide fibres.
- Load capacity 40 kg/cm².